Coordination and Hydroboration of Ru(II)-Borate Complexes: Dihydridoborate vs. Bis(dihydridoborate)

Treatment of [Cp*RuCl₂]₂, 1 , [(COD)IrCl]₂, 2 or [(p-cymene)RuCl₂]_2, 3 (Cp*=η⁵-C₅Me_5, COD= 1,5-cyclooctadiene and p-cymene=η⁶-ⁱPrC₆H₄Me) with heterocyclic borate ligands [Na[(H₃B)L], L₁ and L₂ ( L₁ : L=amt, L₂ : L=mp; amt=2-amino-5-mercapto-1,3,4-thiadiazole, mp=2-mercaptopyridine) led to the formation of borate complexes having uncommon coordination. For example, complexes 1 and 2 on reaction with L₁ and L₂ afforded dihydridoborate species [L^AM(μ-H)₂BHL] 4 – 6 ( 4 : L^A=Cp*, M=Ru, L=amt; 5 : L^A=Cp*, M=Ru, L=mp; 6 : L^A=COD, M=Ir, L=mp). On the other hand, treatment of 3 with L₂ yielded cis- and trans-bis(dihydridoborate) species, [Ru{(μ-H)₂BH(mp)}₂], cis- 7 and trans- 7 . The isolation and structural characterization of fac- and mer-[Ru{(μ-H)₂BH(mp)}{(μ-H)BH(mp)₂}], 8 from the same reaction offered an insight into the behaviour of these dihydridoborate species in solution. Fascinatingly, despite having reduced natural charges on Ru centres both at cis-and trans- 7 , they underwent hydroboration reaction with alkynes that yielded both Markovnikov and anti-Markovnikov addition products, 10 a – d .     

Synergistic Surface Passivation of CH3NH3PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane

CH₃NH₃PbBr₃ perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9–4.2 nm) and excitonic absorption band positions (λ=488–525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46–83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb²⁺ and CH₃NH₃⁺ surface defects are passivated by R−PO₃²⁻ or R−PO₂(OH)⁻, whereas Br⁻ surface defects are passivated by R−NH₃⁺ moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.     

Infrared spectroscopy of closed s-shell gas-phase M+(N2O)n (M = Li,Al) ion-molecule complexes*

ABSTRACT

We present the results of a combined experimental and computational study of the structures of gas-phase M⁺(N₂O)_n (M?=?Li, Al) complexes. Infrared spectra were recorded in the region of the N₂O asymmetric (N?=?N) stretch using photodissociation spectroscopy employing the inert messenger technique. Unlike in our previous studies on M⁺(N₂O)_n (M?=?Cu, Ag, Au and M?=?Co, Rh, Ir) complexes, N– and O–bound isomers in this case are near isoenergetic and are not distinguished spectroscopically at this resolution. In the case of Li⁺ complexes, there is, however, evidence for the presence of bound N₂ moieties, indicating the presence of inserted, OLi⁺N₂(N₂O)_n–type structures. The weak N₂ band lies to the blue of the signature of molecularly N– and O–bound ligands and is well–reproduced in the simulated spectra of energetically low-lying structures computed from density functional theory. No such inserted isomers are observed in the case of Al⁺(N₂O)_n complexes whose infrared spectra can be understood on the basis of molecularly-bound N₂O ligands. The differences in M⁺(N₂O)_n structures observed for these closed–shell, ns², metal centres relative to other metal cations are discussed in terms of the likely bonding motifs.     

Design of and Stability Studies on Trefoil Knots Featuring RhCp* Building Blocks

Four flexible ligands with different lengths, degrees of flexibility, and steric bulk were synthesized and used to prepare metal-directed assemblies. Interestingly, minor differences among the ligands led to products with dramatically different topologies: a binuclear D -shaped macrocycle, tetranuclear rectangles, and hexanuclear trefoil knots. The interconversion of the trefoil-shaped complexes was also investigated. This contribution introduces a rare ligand-controlled trefoil–rectangle shape transformation in solution.     

Bis-tridentate IrIII Phosphors Bearing Two Fused Five-Six-Membered Metallacycles: A Strategy to Improved Photostability of Blue Emitters

Iridium complexes bearing chelating cyclometalates are popular choices as dopant emitters in the fabrication of organic light-emitting diodes (OLEDs). In this contribution, we report a series of blue-emitting, bis-tridentate Ir^III complexes bearing chelates with two fused five-six-membered metallacycles, which are in sharp contrast to the traditional designs of tridentate chelates that form the alternative, fused five-five metallacycles. Five Ir^III complexes, Px-21 – 23 , Cz-4 , and Cz-5 , have been synthesized that contain a coordinated dicarbene pincer chelate incorporating a methylene spacer and a dianionic chromophoric chelate possessing either a phenoxy or carbazolyl appendage to tune the coordination arrangement. All these tridentate chelates afford peripheral ligand–metal–ligand bite angles of 166–170°, which are larger than the typical bite angle of 153–155° observed for their five-five-coordinated tridentate counterparts, thereby leading to reduced geometrical distortion in the octahedral frameworks. Photophysical measurements and TD-DFT studies verified the inherent transition characteristics that give rise to high emission efficiency, and photodegradation experiments confirmed the improved stability in comparison with the benchmark fac-[Ir(ppy)₃] in degassed toluene at room temperature. Phosphorescent OLED devices were also fabricated, among which the carbazolyl-functionalized emitter Cz-5 exhibited the best performance among all the studied bis-tridentate phosphors, showing a maximum external quantum efficiency (EQE_max) of 18.7 % and CIE_x,y coordinates of (0.145, 0.218), with a slightly reduced EQE of 13.7 % at 100 cd m⁻² due to efficiency roll-off.     

Synthesis,characterization, and electrochemistry of monophosphine‐containing diiron propane‐1,2‐dithiolate complexes related to the active site of [FeFe]‐hydrogenases

Five monophosphine‐substituted diiron propane‐1,2‐dithiolate complexes as the active site models of [FeFe]‐hydrogenases have been synthesized and characterized. Reactions of complex [Fe₂(CO)₆{μ‐SCH₂CH(CH₃)S}] ( 1 ) with a monophosphine ligand tris(4‐methylphenyl)phosphine, diphenyl‐2‐pyridylphosphine, tris(4‐chlorophenyl)phosphine, triphenylphosphine, or tris(4‐fluorophenyl)phosphine in the presence of the oxidative agent Me₃NO·2H₂O gave the monophosphine‐substituted diiron complexes [Fe₂(CO)₅(L){μ‐SCH₂CH(CH₃)S}] [L = P(4‐C₆H₄CH₃)₃, 2 ; Ph₂P(2‐C₅H₄N), 3 ; P(4‐C₆H₄Cl)₃, 4 ; PPh₃, 5 ; P(4‐C₆H₄F)₃, 6 ] in 81%–94% yields. Complexes 2 – 6 have been characterized by elemental analysis, spectroscopy, and X‐ray crystallography. In addition, electrochemical studies revealed that these complexes can catalyze the reduction of protons to H₂ in the presence of HOAc.     

The character and the wave front set correspondence in the stable range

We relate the distribution characters and the wave front sets of unitary representation for real reductive dual pairs of type I in the stable range.     

1,10-Phenanthroline: A versatile ligand to promote copper-catalyzed cascade reactions

Ligand-promoted copper-catalyzed cascade reactions have become a robust tool for the synthesis of cyclic compounds. Although numerous ligands have been developed, this review focuses on the introduction of commercially available 1,10-phenanthroline-promoted copper-catalyzed cascade reactions in recent years. Moreover, based on original articles, this review highlights product yields in the presence and absence of the ligand, and the possible mechanistic role of the ‘copper/1,10-phenanthroline’ catalytic system.     

Investigating secondary students beliefs about mathematical problem-solving

Many studies over the past 30 years have highlighted the important role of students’ beliefs for successful problem-solving in mathematics. Given the recent emphasis afforded to problem-solving on the reformed Irish secondary school mathematics curriculum, the main aim of this study was to identify Irish students’ (n = 975) beliefs about the field. A quantitative measure of these beliefs was attained through the use of the Indiana Mathematical Belief Scale, an existing 30-item (five-scale) self-report questionnaire. A statistical analysis of the data revealed that students who were further through their secondary education had a stronger belief that not all problems could be solved by applying routine procedures. In contrast, the same students held less positive beliefs than their younger counterparts that they could solve time-consuming problems and that conceptual understanding was important. The analysis also indicated that gender had a significant impact on three of the five belief scales.